Double Glazed Door Lock Replacement
It might seem difficult to replace a double-glazed door lock however it's not that difficult with the appropriate tools. Replacing your window lock will increase the energy efficiency of your home or office and provide additional security.
Remove the retaining screw on the faceplate of your lock cylinder. Make use of a screwdriver to turn the cylinder to the left.
Replacement cylinders
Euro lock door cylinders or barrel locks can be found in almost all uPVC double-glazed uPVC doors. They provide security and dependability and have been tested and proven to function. Replacement of a cylinder can be needed due to a key being stolen or lost, but also due to aging and the potential for corrosion. Cylinders come in various sizes and styles, as well as finishes to match your door. Depending on the requirements of your home, you can select between cylinders with 1-star or 3-star ratings. The cylinders are protected by BSI Kitemarks that are certified for insurance.
Cylinder locks are built on simple pin & barrel systems which have been in use for many years in the majority, if not all uPVC doors. However, the weakness of these locks is that they can be easily manipulated by burglars using tools to "snap" them and gain entry to your home. We suggest replacing your cylinders using anti-snap cylinders to guard against this common method of burglary.
To remove the old cylinder first, you must open the door and locate the screw located at the edge of the door, between the outer handle and the handle inside. The screw will typically be distinct from the other screws as it has a different color. With a screw driver, you can remove the screw completely. If the screw won't move, then try applying a 3 in 1 type of oil and letting it sit for a few hours or so. This may help, alternatively you can chisel the head of the screw in the direction of 'unscrew' to break it loose.
Having removed the handle screws, you can loosen the cylinder by turning it in either direction (the direction will differ based on the side of the door the locking mechanism is situated). Once the cylinder is loosened, pull it towards you and remove it. Measure lock replacement upvc door www.repairmywindowsanddoors.co.uk and length prior to buying the replacement.
We offer a variety of full and half cylinders, as well as a variety of security cylinders, which are rated for anti-snap resistance and anti-bump. These cylinders are BSI kitemarked and Secured by Design accredited and provide high levels of physical security for your home.
Replacement handles
There are a variety of colours and styles to choose from when replacing handles on a uPVC door. The most important thing to remember is that the new handle fits correctly. The screw size and keyhole size must match. The best way to check is to use our helpful guide to measuring for uPVC handles. This will allow you to get the most accurate measurements and ensure that you buy the right handle. It's also worth thinking about upgrading to a security set of handles. This will increase the security of your door and will keep potential thieves from being able unlock the locks on your uPVC front doors.
Most major uPVC handle manufacturers will have handles that can be used in replacement for double-glazed doors. You can choose from a vast variety of lever and lever handles in different finishes from companies such as ERA, Avocet and Millenco. You can even pick an lever handle that has an option to snib it for added security.
Depending on the requirements depending on the task, you might need to replace the entire handle or just the lever. Most of the time, this is due to wear and tear, but sometimes it could be caused by a fault with the mechanism of the lock. If your lock mechanism is malfunctioning, it's best to contact a Locksmith. If you only need to replace the handle of the lock, you can do it yourself.
Once you've taken your measurements then you can compare them to the sizes of replacement handles available on the market. The most common size for uPVC door handles is 92pz size, but there are also 70pz and 68pz sizes. It is also important to make sure that the new handle comes with a faceplate and backset that are compatible with your existing one. This will ensure that the screw holes are aligned correctly and won't damage the door lock.
If you're replacing the handles on your doors and wish to upgrade to a greater level of security, then it's recommended to consider Sold Secure SS301 or a 2* Kitemark handle set. They're a great option because they're endorsed by the police and have a patented anti-drill and anti-pick features.
Replacement faceplates
Door keeps and faceplates are the last defense against burglars They signal to any would-be burglar that your home is secure which stops them in their tracks. They are important and should be purchased at a trusted hardware shop, whether you shop online or in person. This will help you to make sure you're buying an item of high-quality that lasts for a long time and will protect your windows and doors from corrosion and damage as time passes.
It is essential to know the distinction between a single point uPVC locking system and a multipoint uPVC one. They could be similar to apples and oranges. You'll need to choose the correct faceplate or backset depending on the kind of lock you're installing. A 'backset' is the distance from the door's edge to the middle of the handle or cylinder. A 'faceplate is the metal band that covers the edges of the mechanism. These are the main elements in determining the parts will be required for your new uPVC lock system. It's then a procedure to follow the instructions on how to install them!
Replacement locks
Depending on what you prefer there are many alternatives when it comes time to replace the locks on your uPVC doors. These locks are designed to withstand force and provide increased security for your home. There are uPVC multipoint locking systems that are suitable for commercial use. These are often manufactured by reputable companies, such as Fullex central door lock gearboxes as well as Gardinia doors locks made of uPVC.
When you are choosing a replacement lock for your window, it is important to know the type of backset you require and the faceplate you need. To ensure that the lock is secure and fits correctly and is compatible with your existing lock, ensure that you match these. For instance, if your current lock has a 35mm backset, and a split spindle, then it is possible to purchase a brand new uPVC door handle with an appropriate gearbox, like the Laird Saracen Surelock.
Also, make sure that the lock you choose is compatible with the size of the handle hole and faceplate of your existing windows. This is vital to ensure a seamless connection of the handle and window lock.
After you have chosen the right lock replacement and you are ready to install it in your window. In this process, it is an excellent idea to consult with a locksmith in your area, as they will be competent in selecting the best match. You should also test the new lock.
To avoid this, you must replace your double-glazed windows with a top-quality lock that is resistant to forced entry. This will help to safeguard your valuables from burglary and also keep your family safe. Replacing the window locks is an affordable option that will enhance the security of your property. It can be a challenge for those who aren't familiar with the procedure. To complete the task successfully you must adhere to these steps with care.